Capri Beige Travertine Flat wall panel · 2800 × 1100 mm

Flat Wall Panel — Capri Beige Travertine - PRE-ORDER

This is a pre-order item. Our next stock arrival is expected Mid-December 2026.

Capri Beige Travertine is our warmest stone finish — a soft greige-beige travertine effect with the fine linear striations of a vein-cut slab and the characteristic open pitting of natural travertine. It is the finish for people who find marble a little cold.

Vein-cut, not cross-cut

Travertine can be sawn two ways, and it matters. Cross-cut travertine gives you clouds and rosettes; vein-cut gives you long, quiet horizontal striations. Capri Beige is vein-cut, and that linear grain is what makes it work at wall scale — it draws the eye along the wall rather than holding it in one spot, which visually widens a room. The subtle pitting reads as genuine stone at arm's length, where a flatter print would give itself away.

The most forgiving finish in the range

If you are nervous about committing a whole room to a patterned surface, start here. The warm neutral tone sits happily with oak, walnut, brass, black metalwork, cream, sage and off-white — there is very little it clashes with. It is the finish we recommend most often to customers who are cladding a room they will still be living with in ten years.

Specifications

• Panel size: 2800 × 1100 × 8 mm
• Coverage: 3.08 m² per panel
• Core: bamboo charcoal composite
• Surface: pre-finished decorative layer
• Fire rating: B1
• Water resistance: water-resistant
• Weight: 9–11 kg per panel
• Suitable for: interior walls and ceilings
• Fixing: adhesive to a flat, dry substrate
• Guarantee: 10 years

Where Capri Beige Travertine works best

Bathrooms and en suites are its natural home — travertine reads as a spa material, and unlike the real thing this panel is water-resistant and needs no sealing. It is equally good as a warm whole-room treatment in bedrooms and living rooms, as a hallway lining, and behind a bath or basin run. In commercial work it suits treatment rooms, spas, yoga studios and hotel bathrooms, where the warmth does more for skin tones than a grey stone would.

Installation

Panels bond directly to a flat, dry substrate with high-grab construction adhesive (CT1 or similar). No battens, no sealing, no grout. Cut with a fine-tooth blade or a sharp knife and straight edge. Keep the striations running the same way across the wall — the grain is directional, and one panel fixed upside down is noticeable once the light hits it.

Order a sample first — Warm neutrals are the finishes most affected by your own lighting; a sample under your own bulbs is the only reliable test.