Siena Rust Stone Flat wall panel 10 years guarantee 1 / 10

Large-format wall panel  ·  Adhesive fixing

Siena Rust Stone Flat wall panel · 2800 × 1100 mm

Excellent · 4.5 out of 5 · 143 reviews on Trustpilot
£129.00per panel1 large-format sheet

Pay withKlarna.

Number of panels
panel
–

Courier delivery · £49 per order

Pre-order – due mid-December. Order now and we'll send yours as soon as it arrives.Sent by courier. Delivery details

  • Samples £3.99
  • Price match promise
  • 10 years guarantee
One sheet, no grout2800 × 1100 mm – far quicker than tiling
100% waterproofKitchens, bathrooms and splashbacks
Straight on to the wallBonds with adhesive – no battens
Wipe-clean finishNo sealing, oiling or painting
Siena Rust Stone Flat wall panel

Meet Siena Rust Stone

Warm rust and caramel mottled stone effect. Satin finish.

This is a pre-order item. Our next stock arrival is expected Mid-December 2026.

  • 3.08 m² in a single sheet – far quicker than tiling
  • Bonds straight to a flat, dry wall – no battens, no grout
  • Wipe-clean finish that never needs sealing or painting

Room by room

See it on the wall

Siena Rust Stone Flat wall panel
Siena Rust Stone Flat wall panel
Siena Rust Stone Flat wall panel

Specification

The detail

3.08m²Coverage per panel
2.8mPanel height
1100mmCovered width
8mmThickness
Colour
Siena Rust Stone
Profile
FlatOne unbroken sheet – the finish is the feature.
Panel size
2800 × 1100 × 8 mmHeight × width × depth
Each panel
1 large-format sheet
Coverage
3.08 m² per panel
Material
Bamboo charcoal composite
Surface
Pre-finished decorative layer
Fixing
High-grab adhesive on a flat, dry wall
Cutting
Fine-tooth blade, or a sharp knife and straight edge
Water resistance
100% waterproof
Suitable for
Interior walls and ceilings
Fire rating
B1
Weight
9–11 kg per panel
Guarantee
10 years
Delivery
Courier delivery · £49 per order
About Siena Rust Stone Flat Full product description

Flat Wall Panel — Siena Rust Stone - PRE-ORDER

This is a pre-order item. Our next stock arrival is expected Mid-December 2026.

Siena Rust Stone is the warmest stone finish in our flat wall panel range — a mottled blend of rust, caramel and sandstone with cloudy, weathered patches, like aged plaster or oxidised Tuscan stone. It gives a wall instant depth and warmth that flat paint simply cannot.

Earthy, textural, and full of character

The pattern is irregular by design, with lighter sand-coloured areas breaking through deeper terracotta tones. Up close it reads as hand-finished; across a whole wall it becomes a soft, warm wash of colour that changes with the light through the day.

Made for statement walls

Each panel is a single 2.8 m board, so a standard-height wall goes up floor to ceiling with no horizontal joins — just a fine vertical line every 1.1 m. Panels can be hung either way up, so you can turn alternate boards to spread the darker patches evenly across the wall.

Specifications

  • Panel size: 2800 × 1100 × 8 mm
  • Coverage: 3.08 m² per panel
  • Core: bamboo charcoal composite
  • Surface: pre-finished decorative layer
  • Fire rating: B1
  • Water resistance: water-resistant
  • Weight: 9–11 kg per panel
  • Suitable for: interior walls and ceilings
  • Fixing: adhesive to a flat, dry substrate
  • Guarantee: 10 years

Where Siena Rust Stone works best

Feature walls in living rooms and behind beds, media walls, dining rooms and entrance halls where you want warmth and drama. It pairs beautifully with cream bouclé, travertine, walnut, cognac leather and brushed brass. In commercial schemes it suits restaurants, bars, boutique hotels and retail spaces with a warm Mediterranean or Japandi palette.

Installation

Panels bond directly to a flat, dry substrate with high-grab construction adhesive (CT1 or similar). No battens or substructure required. Cut with a fine-tooth blade or a sharp knife and straight edge. Lay the panels out on the floor before fixing and decide which way up each one goes so the pattern is balanced across the wall.

Order a sample first — warm stone tones vary a lot between screens; a sample shows the true colour in your own light.

Fitting

Four steps to a finished wall

  1. 01Prepare

    The wall must be flat, sound, clean and dry. On an uneven wall, fix timber battens first to give a flat surface. Let the panels settle in the room before fitting.

  2. 02Measure and cut

    Mark a true vertical line to start from. Cut each sheet with a fine-tooth blade, or score it with a sharp knife against a straight edge. Cut openings for sockets with the power off.

  3. 03Fix

    Apply high-grab construction adhesive to the back and press the sheet firmly to the wall. At 9–11 kg a panel, it's a two-person lift.

  4. 04Finish

    Leave the joints as a fine shadow gap or close them with a colour-matched trim. Wipe away excess adhesive straight away, then refit sockets and switches.

Samples

See it in your own light before you commit

Order a sample for £3.99 to check the colour and texture against your room. Samples are posted by Royal Mail.

Reviews

Excellent

Rated 4.5 out of 5, based on 143 reviews on Trustpilot

Super service

“The customer service was second to none – they have been fantastic and gone completely over and above.”

Wayne M.
Great product

“The ordering experience was simple and straightforward, and the products arrived well packaged.”

David L.

Questions

Good to know

Talk to a wall panel expert

Measuring, fixing, sockets and corners – we're happy to help.

WhatsAppCall 0121 387 8717Email us
How many panels do I need?

Measure the width and height of the wall. Each Flat panel covers 1100 mm of width and is 2.8 m tall, so divide the wall width by the panel width and round up. If the wall is taller than the panel, you'll need extra panels to cut pieces for the top. The calculator above works it all out for you.

How are the panels fixed?

Each sheet bonds straight to a flat, dry wall with a high-grab construction adhesive. There's no need for battens, grout or a substructure, and joints can be left as a fine shadow gap.

Can I fit them on plasterboard, or do I need battens?

They go straight on to plasterboard, plaster or any existing wall that's flat, sound, clean and dry. If the wall is uneven or out of true, fix timber battens first to create a flat surface, then bond the panels to the battens.

How do I cut them?

Cut to length with a hand or circular saw with a fine-tooth blade. At internal corners, butt the panels together; at external corners, mitre the edges or finish with a trim, available separately.

Can I use them in a kitchen or bathroom?

Yes. The panels are 100% waterproof, so they suit kitchens, bathrooms and splashbacks, and with no grout lines there's nothing to discolour or reseal. They're for interior use only – ask us before fitting inside a shower enclosure.

How do I look after them?

Wipe with a soft, damp cloth and a little mild detergent. The finish never needs sealing, oiling or painting. Avoid abrasive pads and solvent cleaners.

How are long panels delivered?

This colour is on pre-order and due mid-December – we'll send your order as soon as it arrives. By courier, usually within 2–5 working days of the stock arriving. Courier delivery · £49 per order to UK mainland addresses.

Can I order a sample?

Yes – samples are £3.99 each and are posted by Royal Mail, so you can check the colour and texture in your own light before you order.

Siena Rust Stone Flat